SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Resin 3D Printers, 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey

Okay, I'm not a 3D resin printer expert but I did get this to work after a bit of trial and error and would like to offer a few points for consideration:(a) This is a thick resin. When starting a print, the motor and gear couldn't push the resin fast enough.Therefore, it seems to like to be a bit on the warm side to make it a little runnier.If that does not help, what did work 100% of the time is to use the front panel and sink the build plate into the vat and then start the print. That way it didn't have to push around so much material and printing started perfectly every time.(b) Be careful of void that generate suction. I got into the habit of putting in supports even with not needed to eliminate the suction.(c) Solid forms are still hard and of course, use more resin. Hollowing out will give large forms the soft feel. How thick depends on what you are attempting to achieve, but I just offer this as a note so that you can start experimented from the start.I have not been successful in creating a gadget for an enclosure. I'm still trying to figure out out make those work well.Anyhow, do expect some serious trial-and-error but when you get dialed in, the results are pretty neat.BT recommended if you like to experiment

Good Quality and Inexpensive

Worked really well for the small pieces I needed to print for a friend who laughing his own board game. The color looks great. Nice deep translucent blue, not washed out like a few other popular brands. The smell wasnt as strong as another brand i used so that was a plus. Since i have a magnetic flex plate, part removed very easily. Bumped up first layers to 45 sec. as the flex plate is fairly smooth and adhesion worked out great. Cleaned up fairly easy using 70% alcohol. Cured in 15 min. So far so good but only time will tell. Will be buying again.

Hi Temp.It was clumpy.NEEDS to be heated before use. Place container in hot water, shake, and let it sit until it gets warm, 30 min. This gets the resin in the correct printing state. Its like a different material when given a hot water soak.Failed first print, warmed the container and printed really nicely.45s bottom layer, 4.5s exposure.Qidi Tech S-Box.

The resin holds well, and is stronger than the other brands I use (Siryatech, and Elgoo) and withstands dropping quite well. The printing quality is quite good and the finished models are great.I am unsure if I will buy again, as the liquid form has a downside. I keep my resin printer in an unused room in the house with the windows usually open when its printing, and the door closed with a towel to prevent the resin smell from escaping as much as possible . Usually this is enough to keep any odor inside the room and a reasonable level. But even when its just sitting in the pan waiting to be used, it makes me choke a little even with the 3M filter mask I wear when entering the room, and makes the rest of the house smell like the resin as well. I understand that all resins will have an odor, but this one is heavier and more invasive than most.

It didn't take much testing to figure out the exposure settings. It doesn't have much of a smell, and it does what I need it to do. Most likely going to add a gloss clear top coat to make it more transparent.

If you are on budget, this is the resin for you. This is my go to resin even when I can afford another resin that is 8k. I t is easy use and calibrate. Prints come out fairly nice and detailed. The resin is packaged very good, it comes in a plastic bag; which is the put into a bubble bag. I have ordered a lot of this resin and have never received any of them leaking. You also get a small pack of paint filters that you can use to pour the resin back into your bottle.

So, i experiment a lot when it comes to resins and i am over trying to make my own colors using pigments and micas or other colorants. I opted for this clear green to try and color match another part i had in a similar clear green. It isnt perfect but its dang close. This resin printed perfect on the first try - granted, i dont have much experience with clear resins and i printed a new to me file for the first time using this resin. Overall, i am very happy.